Announcement

Collapse
No announcement yet.

Replacing a fishfinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacing a fishfinder

    Posted by Gman

    I have a Lowrance X37 on the bow my Tracker and want to install an Eagle 500 in its place. How difficult is this process?

  • #2
    It shouldn't be too hard. You can pull the power from the same place as the X37. The hardest part will be routing the new transducer cable to the trolling motor.
    Kirk
    sigpic

    Comment


    • #3
      The biggest thing I have found is that factory wiring is not always the easiest to get in to and monkey with - but with your tracker (if I remember correctly) it shouldnt be too bad. As blueranger says the ducer needs to be spot on.

      Comment

      Working...
      X